Cement Testing Equipment

Approx. Rs 10,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 3,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
150mm x 150mm x 700mm100mm x 100mm x 500mmTwo standard sizes of Beam Moulds are offered for casting concrete specimens for flexuralstrength testing. These beam moulds are made of cast iron and are supplied complete with abase plate.

Approx. Rs 65,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 1727 1967, IS 4031 1968, ASTM C 394, C 64 For making standard rectangularspecimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortar for determiningthe transverse strength. Specification : The jolting apparatus consists of a rectangular tablerigidly connected by two support arms to a spindle at a horizontal distance of 800 mm fromthe center of the table. There is a projecting lug with a plane face on the upper face of thetable beneath which is a stop with a rounded upper surface. The table can be raised andallowed to fall freely on the stop by a cam which is connected to a motor and gearbox througha V-belt an pulleys. The cam rotates at a rate of 60 Rev/Min. A stroke counter fitted withmicro-switch is provided which stops the machine after 60 Jolts. Locating pins are providedfor mounting the mould compartments on the table. The mould surmounted by the hoppercan be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable foroperation on 230 Volts, Single Phase, A.C. Supply. A Digital Preset Counter can be suppliedat an extra cost. Accessories: Steel mould with base plate having three compartments eachhaving 40mm x 40mm x 160mm.

Approx. Rs 65,000 / PieceGet Latest Price

Product BrochureProduct Details:

As Per IS 4031-1968, IS 1624-1960 & ASTM C 151, C 141The autoclave is suitable for conducting accelerated soundness tests on cements or theautoclave expansion test requiring constant steam pressure with the correspondent constantpressure. It consists of a stainless steel cylinder with a welded heat insulated metal housingattractively finished. The attached control unit encloses a sensitive pressure regulator andpressure gauge. Power switches and pilot lights for controlling the electric heating units.Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack tohold specimens above water level in the autoclave and in a vertical position to expose themin the same manner. A Digital PID Controller isfitted for controlling the desired temperature.

Approx. Rs 3,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 4031, 5516, 1727 & 4828, ASTM C-204 BS 4359-2 The apparatus is used fordetermining the fineness of cement in terms of specific surface expressed as total surfacearea in square centimeters per gram of cement. This is a variable flow type are permeability.Specification: The apparatus consists one each of permeability cell 12.5mm I.D. manometer'U' type mounted on stand with a built in stop cock, perforated disc, plunger rubber stopper,rubber tube 30cm long. Packet of 12 filter paper disc and a bottle of 100ml dibutylphthalateliquid.

Approx. Rs 28,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
Digital Machine also AvailableAs Per IS 4031, IS 10080 Vibrating Machine is used for vibrating the mix in moulds at afrequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over 4 coiled springsand the vibrations are developed by means of a revolving eccentric shaft. The center ofgravity of the vibrator, including the cube mould, is either at the center of eccentric shaft orwithin 25mm below it. The simple design of the machine facilitates easy assembly anddismantling of the cube moulds

Approx. Rs 2,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
AS Per IS 4031 1968, ASTM C 188 Used for finding specific gravity of hydraulic cement.Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mmdia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mmdia in that fits a ground glass stopper. The neck has over-all 11mm i.d. upper portion isgraduated from 18ml to 24ml with 1 ml graduation. Just at the bottom of the neck 1 mlcapacity is marked in between there is 17 ml capacity bulb.

Approx. Rs 15,500 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per ASTM D 2419, AASHTO T 176Designed to find out specific gravities of semi liquids like mud and other liquids havingdensities in the range 0.8 to 2.5. It has a stainless steel bam calibrated specific gravitiesfrom 0.8 to 2.5. A stainless steel cup with lid and overflow vent is fitted on one side of thebeam. A counter weights with cursor slides over the graduated scale. The beam has aknife-edge at center which rests in a fulcrum fitted in the stand. Leveling screws and spiritlevel are fitted to the stand.

Approx. Rs 25,000 / PieceGet Latest Price

Product BrochureProduct Details:

Proper compaction of cement concrete while casting specimens for compression testing is desirable to achieve a better and more consistent mixture. Vibrating table is ideally suited for this purpose. The table to is 500 mm x 500 mm and has stops along its edges to prevent moulds from sliding off the table during operation. The maximum load capacity is 140 kg. The variable pitch pully arrangemant permits the frequency to be varied steplessly between 600 cycles/sec. and 430 cycles/sec. Suitable for operation 415 volts,3 phase. 50 Hz. A.C. supply

Approx. Rs 3,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per ASTM C 266 This instrument is used for determining the time setting of hydrauliccement. Specification: A base with a Vertical shaft and Two horizontal arms. The lower armsis adjustable for height. 1 no. Initial needle 1/12-inch dia. 1⁄4 lb. Wt. 1 no. Final needle 1/24inch dia. 1⁄4 lb. Wt. 1 no. Glass base plate. Complete as above.

Approx. Rs 2,500 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 4031, 2645, 2542 (PART-1), 1727, 5513 & 712 BS 12, 146, 915, 1370, 4027,4246, 4248 AASHTO T 129, E 131. Specification: Same as Vicat Needle Apparatus but inaddition is fitted with a dashpot which facilities gentle lowering of the needles. Accessories:Mild steel base plate 5 inches x 5 inches. Fulcrum mould, brass, 70mm i.d. base dia. x 60mmi.d. top dia., 40 mm height. Note:1) Normally set of needles and mould which meet isrequirements as per I.S. 5513 are supplied. While ordering please specify the specificationcode of the instrument required. 2) Vicat needle apparatus for determining consistency ofhydraulic cement. Gypsum plaster, lime

Approx. Rs 55,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
AS PER IS: 1237 and 654 The Tile Flexure Testing Machine is used to determine the flexuralstrength of clay roofing tiles and cement concrete flooring tiles. We are one of the leadingmanufacturers of Tile Flexure Testing Machines. Our machines are manufactured using bestraw materials to ensure good functionality and durability. The Tile Flexure Testing Machineis a double lever loading machine where load is placed by a flow of lead metal thatautomatically stops as the sample breaks. The sample is mounted between rollers which are40mm or 12mm in dia. Bearing rollers can be placed at center distances of 150, 200 or270mm. The unit comes equipped with a 20 Kg lead metal.

Approx. Rs 12,500 / PieceGet Latest Price

Product BrochureProduct Details:

The Flow Table consists of a brass table top 250 ± 2.5 mm dia mounted on a rigid stand. The table top is re-inforced with equally disposed ribs and allowed to drop through 12 mm by a ground and hardened cam. Complete with mould 100 mm base dia. 70 mm top dia, 50 mm high.

Approx. Rs 3,000 / PieceGet Latest Price

Product BrochureProduct Details:

As Per IS 7535 1986 ASTM C183 AASHTO T127 This is a brass tube approximately 53 cmlong and 2.8 cm I.D. with a wooden handle. Total length approximately 73cm. The tube hasthe sharp angular edge which conveniently pierces cement bags. An air hole ofapproximately 3mm dia. is drilled on the tube near handle. Total sample collected at onetime is 300 cm approximately

Approx. Rs 25,000 / PieceGet Latest Price

Product BrochureProduct Details:

The Flow Table consists of a brass table top 250 ± 2.5 mm dia mounted on a rigid stand. The table top is re-inforced with equally disposed ribs and allowed to drop through 12 mm by a ground and hardened cam. Complete with mould 100 mm base dia. 70 mm top dia, 50 mm high.

Approx. Rs 25,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 2,500 / PieceGet Latest Price

Product BrochureProduct Details:

The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications. Vicat Apparatus consists of a frame bearing a movable rod with a cap at top and a vicat mould in the form of the frustum of a cone, (80+5)/70 + 5mm dia at the base,(70mm+5mm) /60 mm at the top and 40 mm high, and with a glass base plate of minimum 2.5 mm thickness with various models of Vicat apparatus 
Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:

Bull Float screed:

• 4feet lenght
• 8" breadth
• 2mtr x 2nos pipes
• Heavy duty 5mm thickness

Approx. Rs 25,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 1,500 / PieceGet Latest Price

Product Details:

Note:-Product available as per the customer requirement Our product is highly appreciated by customers 

Approx. Rs 1,500 / PieceGet Latest Price

Product Details:

Note:-Product available as per the customer requirement Our product is highly appreciated by customers 

Approx. Rs 5,500 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 8,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 11,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 300 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 28,000 / PieceGet Latest Price

Product Details:

Description:
Digital Machine also AvailableAs Per IS 4031, IS 10080 Vibrating Machine is used for vibrating the mix in moulds at afrequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over 4 coiled springsand the vibrations are developed by means of a revolving eccentric shaft. The center ofgravity of the vibrator, including the cube mould, is either at the center of eccentric shaft orwithin 25mm below it. The simple design of the machine facilitates easy assembly anddismantling of the cube moulds

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 2,25,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 500 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 30,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 85,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers.