Rock Testing Lab Equipment

Approx. Rs 10,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The concrete test hammer is an instrument which is easy to use, for quick and approximatemeasurement of the resistance to pressure of manufactured concrete products. The principleson which it works are based on the rebound impact of a hammer on a piston which restsagainst the surface of the concrete products. The Greater the resistance of the concrete,greater is the rebounded impact. By reading this rebound impact on a scale and relating it tocurves on graphs supplied with the instrument, the resistance to compression in MPA or PSIcan be found, with 20% of actual. Specifications : Consists of a barrel in which is housed ahammer mass attached to an impact spring which slides on a guide bar. A plunger is attachedto the guide bar which is pressed against the surface to be tested. As the piston is pressedagainst the surface to be tested, on reaching the compressive strength, the hammer mass isreleased and rebounds to a certain extent (according to the strength of the surface) which isindicated by a rider on a calibrated scale. A lock button fixed on the body of the hammerlocks the rider in place and the rider can be reached to zero position by using the same button.The equivalent compressive strength can be computed from the chart supplied. Each hammeris calibrated against at standard test hammer, and is suitable for specimen of compressivestrengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing thetest surface, is supplied in carrying case.

Approx. Rs 55,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 16,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 60,000 / PieceGet Latest Price

Product Details:

• Specification: Point Load Index tester, a rock testing instrument for determining the Diametrical Point Load Strength Index of rock cores and Irregular Lumps which may be tested without any treatment. The Point Load Test is primarily as index Test for strength classified of rock materials. This instrument is mainly intended for field measurements on rocks specimen, but it can be used in the laboratory. The results of the test may also be used to predict the uniaxial compressive strength of rock from correlations. The apparatus is light and portable and can be used in the laboratory as well as in the field

Features:

• Equipment is light and portable
• Rock core specimens can be tested without any preparation
• The instrument can be used in the laboratory as well as at the drilling site
• The results of the test may also be used to predict the uniaxial compressive strength of rock.
• With this instrument, a wide range of core size can be tested
• The frame has adequate adjustments to align perfectly the loading axis passing through the centre of the bearing plates and loading platens at the position of the ram of the hydraulic jack

The equipment comprised the followings:

• Loading Frame, fitted with Hydraulic Jack, hand operated, capacity 100 KN
• Load Gauge, 25KN (2,500 kgf) to read upto 0.25KN (25kgf)
• Load Gauge, 100KN (10,000 kgf) to read upto 0.50KN (50kgf)
• Conical Loading Platens.
• Diaphragm Bolt.

Approx. Rs 1,50,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 1,25,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 1,10,000 / PieceGet Latest Price

Product Details:

Digital Point Load Test Apparatus Consists Of A 100 KN Capacity Load Frame With a Hydraulic Loading Ram Driven By A Hand Pump.

The Frame is Adjustable for Testing of Samples Up To 100mm Diameter.

A ruler assembled On the Frame allows the direct measurement Of the Distance between the Conical Platens before and after the test.

The compression load is measured by a pressure transducer connected to an advanced digital display unit assuring the best accuracy and resistance to the failure shocks

Features:

• Load testing range : 0 - 100 KN 

• Load measurement in KN

Approx. Rs 55,000 / PieceGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers.