Soil Testing Lab Equipments

Approx. Rs 15,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 85,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 2720 (PART XIV), ASTM D 4253 & ASTM D 4254 The equipment is used for the determination of the relative density of cohesionless free-draining soils and meets the essential requirements. Specification: The equipment consists of one each of the following: A vibratory table with cushioned steel vibrating decks of about 75 cm x 75 cm. It has a frequency of approximately 3600 vibrations per minute on a vibratory table under a 11.5 kg load. Amplitude is variable in between 0.65 mm in steps of 0.05 to 0.25 mm, 0.25 to 0.45 mm and 0.45 to 0.65 mm. Suitable for operations on a 415V, three-phase supply. Cylindrical metal unit weight mould, 3000 ml. Capacity. Guide sleeve with clamp assembly. Surcharges the baseplate for the mould. Handle for the surcharge baseplate. Surcharge weight. The total weight, together with the surcharge base plate and handle, is equipment for 140 kg/sq cm. For mould. Cylindrical metal unit weight mould, 15000 ml capacity. (Total weight together with the above mould & surcharge weight is equivalent to 140 kg/sq. cm) dial gauge 0.01 mm x 50 mm travel. An extension piece of 25 mm for a dial gauge.

Approx. Rs 45,000 / PieceGet Latest Price

Product BrochureProduct Details:

The apparatus is light weight, portable but sturdy, bench type and can be used in the laboratory, field and also in a mobile laboratory. Specimens of size 38, 50, 75 and 100 mm dia can be tested. Models Available: Hand Operated Motorised .

Approx. Rs 13,500 / PieceGet Latest Price

Product BrochureProduct Details:

Extractor Frame is used for taking out soil samples compacted or undisturbed from 100mm dia and 150mm dia cylinders such as core cutters, proctor moulds, CBR moulds etc. The equipment include:- A 5 Ton capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100mm dia and the other for 150mm dia moulds. One thrust plate for 150mm dia and one for 100mm dia specimens are also there with

Universal Sample Extractor  Manufacturer in Chennai, Universal Sample Extractor Dealer in Chennai, Universal Sample Extractor Shop in Chennai, Universal Sample Extractor Supplier in Chennai, Universal Sample Extractor Price in Chennai

 

 

 

Universal Sample Extractor Manufacturer in Tamilnadu,  Universal Sample Extractor Manufacturer in Chennai, Universal Sample Extractor Manufacturer in Kanchipuram,  Universal Sample Extractor Manufacturer in Tiruvallur, Universal Sample Extractor Manufacturer in Cuddalore, Universal Sample Extractor Manufacturer in  Villupuram, Universal Sample Extractor Manufacturer in Vellore,  Universal Sample Extractor Manufacturer in Tiruvannamalai, Universal Sample Extractor Manufacturer in Salem,  Universal Sample Extractor Manufacturer in Namakkal, Universal Sample Extractor Manufacturer in Dharmapuri, Universal Sample Extractor Manufacturer in Erode, Universal Sample Extractor Manufacturer in Coimbatore, Universal Sample Extractor Manufacturer in The Nilgiris, Universal Sample Extractor Manufacturer in Thanjavur, Universal Sample Extractor Manufacturer in Nagapattinam, Universal Sample Extractor Manufacturer in Tiruvarur,  Universal Sample Extractor Manufacturer in Tiruchirappalli, Universal Sample Extractor Manufacturer in Karur, Universal Sample Extractor Manufacturer in Perambalur, Universal Sample Extractor Manufacturer in Pudukkottai, Universal Sample Extractor Manufacturer in Madurai, Universal Sample Extractor Manufacturer in Theni, Universal Sample Extractor Manufacturer in Dindigul, Universal Sample Extractor Manufacturer in Ramanathapuram, Universal Sample Extractor Manufacturer in Virudhunagar, Universal Sample Extractor Manufacturer in Sivagangai, Universal Sample Extractor Manufacturer in Tirunelveli, Universal Sample Extractor Manufacturer in Thoothukkudi, Universal Sample Extractor Manufacturer in Kanniyakumari, Universal Sample Extractor Manufacturer in Krishnagiri, Universal Sample Extractor Manufacturer in Ariyalur, Universal Sample Extractor Manufacturer in Tiruppur

Approx. Rs 55,000 / PieceGet Latest Price

Product BrochureProduct Details:

Note:
Product available as per the customer requirement Our product is highly appreciated by customers

Approx. Rs 25,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 2720 (XXX)-1968 BS 1377.Consists of a torque head adjustable in height by means of a lead screw rotated by a drivewheel to enable the vane to be lowered into the specimen. Rotation of the vane is by meansof a hand wheel which operates a worm gear arrangement turning the upper end of acalibration torsion spring, vane dia, rod dia, vane size & vane height are as per ISspecifications. The vane shaft is attached through the hollow upper shaft to a resettablepointer, which indicates the angle indicates the angle of torque on a dial graduated in degreethe dial reading multiplied by spring factor gives the torque a container for soil sample isalso supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as containerSupplied with set of four springs, one each of approx. 2 kgs/cm sq., 4kgs/cm sq., 6 kgs/cmsq. & 8kgs/cm sq. complete as above in a wooden carrying case

Approx. Rs 1,00,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 2720 (PART XII)The cell is useful for testing 38mm dia x 76mm high soil specimen. Transparent Perspexchamber with anvil and loading plunger, the cell is easily opened by releasing four nuts ofthe tie rods. It is leak proof up to 10kg/cm.sq. Fluid pressure. An oil plug which can also beused as an air vent is provided for introducing a thin layer of oil over water. This provideseffective sealing at the plunger for long duration tests. The cell is fitted with four sleevepacked valves of no volume change type on the base. These valves are used for cell pressure,pore water pressure, drainage or back pressure. The loading plunger of the cell has dialgauge rest. Loading pad made of Perspex for 38mm dia specimens. Pair of plain discs madeof Perspex 38mm dia 6mm thick. Pair of porous stones 38mm dia specimen. Split sandformer for 38mm dia specimen. Sheath stretcher for 38mm dia specimen. One dozen rubbersheaths for 38mm dia samples. For synthetic rubber 'o' rings for 38mm dia specimen. Oneplastic drainage tubeOne load frame 5000 Kgf motorized , consists one rate of strain type, giving the followingrates of strain. 1.25mm/min . Load frame is supplied with a dial gauge bracket. Universaltriaxial cell (stationary bushing) 10kg/cm.sq. One lateral pressure assembly 0-10 kg/cm.sq.One lateral pressure assembly 0-10kg/cm.sq. complete with foot pump and rubber hose. Onehigh sensitivity proving ring capacity 1000kg. One strain dial gauge 0.01 x 25mm. Suitablefor operation on 230 V A.C.It is designed for application of cell pressure upto 10kg/cm on a triaxial specimen in thetriaxial cell. The unit is mostly used in routine tests which last for about 10 to 15 minuteswherein the variations of cell pressure can be tolerated. The apparatus consists of a pressurechamber which has a flanged top 2 cap fitted with a 10 kg/cm . Pressure gauge and a valvefor pumping in air. Water inlet and drain cock are fitted to the chamber. 2 The foot pumpsupplied easily develops a pressure of 10 kg/cm2 Complete with connecting pressure hose.

Approx. Rs 30,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 2720 (Part XBII)- 1966 BS 1377; EN DD ENV 1997-2; ASTM D2434; AASHTOT215 This equipment is used for testing the permeability of granular soils (sands andgravels).The specimen is formed in a permeability cell and water is passed through it froma constant level tank Take-off points located along the sides of the permeability cell areconnected to three manometer tubes mounted on a panel complete with a meter scale. Waterpassing through the specimen is collected and measured, either for a specific quantity orover a period of time. The reduction of head is noted from the variation of water level in themanometer tubes. Comprising three glass tubes of constant bore, meter scale and connectingtubing for cell pressure take-off points, all mounted on a free-standing panel. Manufacturedfrom transparent plastic with attachment for wall mounting. The inlet, outlet and overflowpipes are fitted to the base of the tank and can be adjusted for height within the tank.Supplied complete with connecting tubing.Clays and silts are tested using the ‘falling head’ technique. Flow of water through thespecimen is observed by monitoring the rate of fall of water in the tube. It is essential thatsoils of very low permeability are sealed inside the cylinder to prevent seepage along thesides of the specimen. Before testing, the specimen must be completely saturated with wateras the presence of air will restrict the flow of water Specification : The equipment comprisesone each : - Gun metal mould - 100mm I.D. x 127.3mm high x 1000ml Volume. - Gunmetal mould extension collar - 100mm dia x 60mm high for the above mould. - Gun metaldrainage base plate with a recess for a porous stone, GI Tank

Approx. Rs 8,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
This is a light, portable but sturdy sieve shaker suitable for bench mounting the side to sidemovement to the carrier which can take upto 7 sieves of 200mm dia. is through a train ofgears operated by a hand wheel. A heavy fly wheels ensures smooth operation.

Approx. Rs 3,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS 2720 (PART XXIX) 1966 & BS 1377-9This is used for determination of in situ dry density of natural or compacted fine grainedsoil, free from aggregates. A cylindrical cutter is used to extract a sample of the soil withthe help of a dolly and rammer. From the weight, density and the moisture, and dry densityof the soil is ready calculated. It consists one each of: cylindrical core cutter mode of steel,127.3mm. Long and 100mm internal diameter. Steel dolly, 25mm high with a lip to enableit to be located on top of the core cutter, rammer with detachable steel rod. SPARE,OPTIONAL EXTRA AND ACCESSORIES:- 1. Cylindrical core cutter 100mm i.d. x175mm long 2. Dolly 3. Test form pad of 50.

Approx. Rs 3,500 / PieceGet Latest Price

Product BrochureProduct Details:

As Per IS 2720 (PART II)For quick determination of moisture content of materials in powder form viz. Soil, Sand,Coal pottery slip, cement etc. Calcium carbide when comes in contact with moistureacetylene gas is generated. This principle is used in Rapid moisture meter. A weighedquantity of samples is mixed with fixed quantity of calcium carbide reagent and the wholemixture is thoroughly shaken in a vessel to which a pressure gauge is fixed. The acetylenegas produced develops pressure. The instrument indicate moisture on Wet / weight basis .easily convertible to dry weight basis. The unit consists of a pressure vessel with clamp forsealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content0 -25%, 50% on wet weight basis . A counte poised balance for weighing sample, a scoopfor measuring carbide reagent , one bottle of reagent approx. 450 gram, One cleaning brushand a steel balls for through mixing. Complete in wooden carrying box with handle.

Approx. Rs 3,500 / PieceGet Latest Price

Product BrochureProduct Details:

Are specially designed for Laboratory Purpose and are controlled by means of three heat rotating switch. Complete with plug pin, cord suitable for operation on 220 volts A.C. Main. Size : 20 cm dia. 

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 2,000 / PieceGet Latest Price

Product BrochureProduct Details:

Sand Pouring Cylinder

Salient Features

• Specifications :The complete apparatus consists one each of: Small Sand Pouring cylinder, 3 litre capacity, fitted with conical funnel and shutter. Cylinder calibrating container, internal dia 10 cm and internal depth 15 cm, fitted with a flange, Metal tray, 30 cm. square and 4 cm deep with a 10 cm dia hole in the centre.
• 
  
  Accessories :
  Metal tray, 30 cm square and 4 cm deep without hole.
  Test forms pad of 50

Tag: Sand Pouring Cylinder Dealer in Chennai , Sand Pouring Cylinder manufacture in Chennai

Ariyalur, Sand Pouring Cylinder in Tiruppur

Field Density Apparatus Manufacturer in Chennai, Field Density Apparatus Dealer in Chennai, Field Density Apparatus Shop in Chennai, Field Density Apparatus Supplier in Chennai, Field Density Apparatus Price in Chennai

 

 

 

Field Density Apparatus Manufacturer in Tamilnadu, Field Density Apparatus Manufacturer in Chennai, Field Density Apparatus Manufacturer in Kanchipuram, Field Density Apparatus Manufacturer in Tiruvallur, Field Density Apparatus Manufacturer in Cuddalore, Field Density Apparatus Manufacturer in Villupuram, Field Density Apparatus Manufacturer in Vellore, Field Density Apparatus Manufacturer in Tiruvannamalai, Field Density Apparatus Manufacturer in Salem, Field Density Apparatus Manufacturer in Namakkal, Field Density Apparatus Manufacturer in Dharmapuri, Field Density Apparatus Manufacturer in Erode, Field Density Apparatus Manufacturer in Coimbatore, Field Density Apparatus Manufacturer in The Nilgiris, Field Density Apparatus Manufacturer in Thanjavur, Field Density Apparatus Manufacturer in Nagapattinam, Field Density Apparatus Manufacturer in Tiruvarur, Field Density Apparatus Manufacturer in Tiruchirappalli, Field Density Apparatus Manufacturer in Karur, Field Density Apparatus Manufacturer in Perambalur, Field Density Apparatus Manufacturer in Pudukkottai, Field Density Apparatus Manufacturer in Madurai, Field Density Apparatus Manufacturer in Theni, Field Density Apparatus Manufacturer in Dindigul, Field Density Apparatus Manufacturer in Ramanathapuram, Field Density Apparatus Manufacturer in Virudhunagar, Field Density Apparatus Manufacturer in Sivagangai, Field Density Apparatus Manufacturer in Tirunelveli, Field Density Apparatus Manufacturer in Thoothukkudi, Field Density Apparatus Manufacturer in Kanniyakumari, Field Density Apparatus Manufacturer in Krishnagiri, Field Density Apparatus Manufacturer in Ariyalur, Field Density Apparatus Manufacturer in Tiruppur

Approx. Rs 80 / KgGet Latest Price

Product BrochureProduct Details:

Standard Sand for Sand replacement method and Field Dry density Test. Available in bulk Sandy soils usually have higher bulk densities (1.3–1.7 g/cm3) than fine silts and clays (1.1 – 1.6 g/cm3) because they have larger, but fewer, pore spaces. In clay soils with good soil structure, there is a greater amount of pore space because the particles are very small, and many small pore spaces fit between them.

Approx. Rs 55,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per ASTM D 2419, AASHTO T 176This cone is used to find out viscosity of bentonite slurry and similar material. The marshcone is 6 inch in diameter at the top and 12 inch long, and tapers to join a tube 2 inch longand 3/16 inch inside dia. The capacity of the funnel is 1500cc. Time in seconds required toflow out 1000cc of slurry from cone is measured as funnel viscosity of the material.

Approx. Rs 2,500 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
Motorized Liquid Limit also AvailableAs Per IS 2720 (PART V), BS 1377-2 , ASTM D 4318Casagrande method in mechanical form is known as liquid limit method and has been in useforsoil mechanicsfor a number of decades. The liquid limit data ofsoilsis useful to correlatemechanical properties of soil, such as compressibility and lower shear strength. Liquid limitis the water content at which soil passes from zero strength to an infinite strength, hence thetrue value of liquid limit cannot be determined. For determination purpose liquid limit isthat water content at which a part of soil, cut by a groove of standard dimensions, will flowtogether for a distance of 1.25cm under an impact of 25 blows in a standard liquid limitapparatus. The soil at the water content has some strength which is about 0.17N/cm. sq.(17gms/sq.cm.). At this water content soil just passes from liquid state to plastic state. Itconsists on a brass cup held on an adjustable bracket. The cup can be adjusted for a fall of1 cm and can be raised an dropped on a rubber base of standard hardness by cam action.Complete with one Casagrande grooving tool, one ASTM grooving tool and a height gaugeblock.

Approx. Rs 1,00,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS : 9669, IS : 2720 (Part XVI)It is used in large road construction projects has increased considerably in recent years. Thisapparatus, mounted on a rolled steel joint cantilevered from the back of the truck or fittedto the underside of a mobile frame, can be used to determine the bearing capacity of soilsquickly and efficiency. This method of testing in-situ, using piston penetration, is useful fordetermining the load carrying capacity in the field, when the in -place density and watercontents are such that the degree of saturation is 80% or greater. When the material is coarsegrained and cohesionless so that it is not affected b changes in the water content and whenthe material has been in- place. Similar to above but supplied with bench mounting type5000kgf. Capacity load frame motorized, in place of load frame hand operated. The leadscrew of the load frame has a single constant rate of travel of 1.25mm/minute. Dial Gauge2 in. travel & 0.001 in division for CBR penetration measurement, having provision forincreasing the dial gauge- plunger length .Proving ring , 50 kN (5,000kgf) capacity x 0.5.kN/Div sensitivity/ readability, one with 25 kN capacity x 0.04 kN / div sensitivity /readability and one with 10 kN capacity x 0.01 kN / div sensitivity / readability.Note: Proving Rings of other capacities are also available 

Approx. Rs 2,000 / PieceGet Latest Price

Product BrochureProduct Details:

Used to determine the in-situ density of fine graned compacted soil. The apparatus consists of: sand pouring cylinder with shutter made of cast aluminium and accurately machined, upper cylinder, metal tray with fixed centre hole for cone housing.

Approx. Rs 1,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 1,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 60,000 / PieceGet Latest Price

Product BrochureProduct Details:

Unit consists of Steel Bearing Plates 25 mm thick of 75, 60, 45 and 30 cm dia Plain and Chequrred. Bridge support complete with two dial guage clamps.Hydraulic Jack 50/tonnes capacity complete with 2 meter steel pipe connection with separate pump and pressure guage.Ball and socket for the jack.Load Truss complete with four soil anchors and working collors. Capacity 20 and 30 ton.Dial guage .01 mm least count.

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 500 / KgGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 1,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 6,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 3,000 / PieceGet Latest Price

Product BrochureProduct Details:

This is for evaluating the strength of soil on field exploration or construction site and in the preliminary laboratory studies.It gives directly the unconfined strength.

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 13,500 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 22,000 / PieceGet Latest Price

Product BrochureProduct Details:

Motorised:-Carries up to 7 sieves of 20 cm diameter. The shaker is driven by a 1/4 hp. electric motor through a reduction gear. The sieve table does not rotable but is inclined from the vertical axis and the direction changes progressively in the clockwise direction. By removal of a stop-pin fixed to below the table, the shaker can have a rotatory motion. In addition to the gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. The whole gear mechanism runs in an oil bath. Suitable for operation on 230 volts, 50 cycles, single phase, AC supply- Supplied without sieves, lid and receiver and time switch. Optional Extras : Adaptor for 30cm diameter sieves.Time switch, 0-60, min. graduations.
Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 12,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
One of the primary functions of a drilling fluid is to carry drilled solids from the well bore.These solids are a contaminant and, if left in the system, can lead to numerous problems. The OFITE sand content kit determines the volume per cent of sand-sized particles in the drilling fluid. Api defines sand-sized particles as any material larger than 74 µm (200-mesh) in size.The test can be performed on low-solids fluids as well as on weighted fluids. The kit consists of a glass tube graduated to read per cent by volume, a funnel, and a 200-mesh sieve contained in a cylindrical-shaped holder Consists of a sand content kit, complete with sieve, funnel, graduated tube, wash bottle & carrying case.

Features:

• Api Defines Sand-Sized Particles As Any Material Larger Than 74 µm (200-Mesh) In Size
• The kit consists of a glass tube graduated to read per cent by volume, A Funnel, and a 200-mesh sieve contained in a cylindrical-shaped holder.

Approx. Rs 45,000 / PieceGet Latest Price

Product BrochureProduct Details:

It is designed to determine the swelling pressure developed by a soil specimen moulded to desired densities at known moisture contents, when soaked in water.The load applied to restrain the swelling is transfered to a load measuring proving ring through a perforated swell plate and a load transitor bar. The proving ring is attached to the lead screw of load frame, hand operated, designed for the purpose. The load frame has a worm gear arrangement for initial setting and for subsequent volume change compensation. A soaking tank is provided for saturating the specimen and the base of the mould has channeis and radial grooves with connecting holes.

Approx. Rs 750 / PieceGet Latest Price

Product BrochureProduct Details:

Sieves 20 cm dia are fabricated out of spun brass, without joint frame, double folded bottom, having beading at top, tightly fitting with each other (Endcott pattern), with brass wire mesh, our own brand. Three series are normally available : BSS / ASTM / ISS.

Approx. Rs 1,00,000 / PieceGet Latest Price

Product BrochureProduct Details:

For determining the triaxial shear strength of soil specimens of 28mm diameter. The length to diameter ratio of sample is 1:2 Specification: One loading unit, for single unit, for single cell mounting, capacity 5 tonnes. Supplied with motorised load frame. The loading unit is supplied with one dial gauge bracket. One Triaxial Cell for 38 mm dia specimen, stationary bushing. Lateral Pressure assembly. 0-10kg/cm sq. complete with foot pump and rubber hose. One dial gauge 0.01 mm X 25 mm for strain measurement. One high sensitive Proving Ring, capacity 200/250 kg with Calibration Report and carrying case. Accessories: High sensitivity Proving Ring, capacity 1000 kg. complete with calibration report and carrying case. Salient Features • Triaxial Shear Test Apparatus (Motorised) Single Speed : Same as above, supplied with motorised load frame. The load frame supplied with this outfit is bench mounting type motorised load frame of 5000 kgf having constant rate of strain 1.25 mm/min. Suitable for operation on 230 Volts A.C. • Triaxial Shear Test Apparatus (Motorised) 3 Speed : • Universal Triaxial Shear Apparatus (Motorised) 6 Speed : For determining the triaxial shear strength of soil specimens of 38 mm, 50 mm, 75 mm and 100 mm. Consists of: One load frame 5000 kgf motorised, constant six rates of strain type, giving the following rates of strain. 1.25, 0.25, 0.05, 0.01,0.002,0.0004 mm/min. Load frame is supplied with a dial gauge bracket. Universal Triaxial Cell (Stationary Bushing) 10 kg/cm.sq. One Lateral Pressure assembly 0-10 kg/cm.sq complete with foot pump and rubber hose. One high sensitivity Proving Ring capacity 1000 kg.One strain dial guage 0.01 X 25 mm. Suitable for operation on 230 Volts A.C. 

Approx. Rs 1,10,000 / PieceGet Latest Price

Product BrochureProduct Details:

The apparatus comprises of the following :- Loading Unit:- Vertical load, capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load for the applied either througe a steel ball recessed in the loading pad or directly through a base of the loading yoke. shear load capacity 400 kg. Direct shear box for square specimen size 60X60X25 mm complete with one base plate, two plane gripper plates, porous stones and one loading pad. shear box housing,complete with two ball roller strips. Specimen cutter for 60X60X25 mm specimen.

Approx. Rs 60,000 / PieceGet Latest Price

Product BrochureProduct Details:

Unit consists of Steel Bearing Plates 25 mm thick of 75, 60, 45 and 30 cm dia Plain and Chequrred. Bridge support complete with two dial guage clamps.Hydraulic Jack 50/tonnes capacity complete with 2 meter steel pipe connection with separate pump and pressure guage.Ball and socket for the jack.Load Truss complete with four soil anchors and working collors. Capacity 20 and 30 ton.Dial guage .01 mm least count.

Approx. Rs 80 / KgGet Latest Price

Product Details:

We are wholesale Supplier of the Ennor Sand / Indian Standard Sand In Chennai / Tamilnadu

Specifications:

• Grade-1 - above 12mm
• Grade-II - 6mm to 12mm
• Grade-III - 3mm to 6mm
• Grade-IV - 1mm to 3mm
• Grade-V - below 1mm and fines power

Indian Standard Stand- Ennore:

• Sand Develop by Tamilandu Minerals Limited.
• Know as Tamin Tamin is wholly owned company of Government of Tamilnadu Started in 1978.
• Company Have ISI Mark.

Keyword: Ennore Sand Dealer in Chennai, Tamilnadu, Ennore Sand Manufacturer in Chennai, Tamilnadu, Ennore Sand Supplier in Chennai, Tamilnadu, Ennore Sand Retailer in Chennai, Tamilnadu

Approx. Rs 80 / KgGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 2,000 / PieceGet Latest Price

Product BrochureProduct Details:

Sampling Auger outfit. Post-holed auger. Complete with 1 meter rod, tee piece, and handle head size 3", 4" and 6"dia.Sampling Augers outfit-screw type auger, complete with 1 meter rod, tee piece, and handle head size 2", 3" dia. Extension rod 1 meter with end couplings.

Approx. Rs 3,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
As Per IS: 2720(P-VII)
Specification: Soil compaction is of utmost requirement for constructing earth fill for dams,canal embankments, reservoirs, highways, runways and railways. The relationship betweensoil moisture content and compacted dry density largely determine the constructionspecifications and quality control of compacted earth fill. To check the strength of the soilthe density of the soil is

Approx. Rs 2,000 / PieceGet Latest Price

Product BrochureProduct Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers. 

Approx. Rs 80 / KgGet Latest Price

Product Details:

Description:
The product is available as per the customer requirement. Our product is highly appreciated by customers.